33 detektavimo zonos

Operating Temperatures : -37°C to 70°C

Humidity: To 95% non-condensing

Operating Frequency: 93 kHz 

Audio Frequency: 2kHz Warble

Tuning: Automatic

Indicators: Speaker

LED Alert Lights:

Green: Power ON
Amber: Battery LOW

Red: ALARM condition
Controls Power switch (ON / OFF)
Interference Elimination Momentary Switch

Battery Single 9 volt battery provides up to 60 hours of normal operation. Optional NiMH
rechargeable battery provides up to 20 hours on each 12-hour recharge.

Dimensions:

Width 8.3cm Thickness: 4.13 cm Length: 42cm Weight: 500g

Warranty: Limited,12 months for parts and labor

GC-1001 is a kind of small Hand-Held Metal Detector,which is a special machine to security inspection.This machine is convenient to use, no adjustable controller,quickly reaction when detecting metals,and sound and light simultaneous alarming.It would sound clearly in low frequency when detecting small metal.
It would sound clearly in high frequency when detecting big metal.

Function:

1.Easy and convenient to operate

2.The manual part makes anti-smoothy design

3.Two sides both alarm with flashing red light when detecting metal articles.

4.Low battery waste:no waste when stop working,below 1mA when working.

5.Super-high accuracy and sensitivity that be able to detect very small metals(up to 0.1g)

6.The system be able to inspect power source and battery failure, power insufficient .

7.Alarm in different sounds according to different metals,and connect earphone available in harmonious surroundings

Product parameter:

1、Dimension：410mm*85mm

2、Power Source:standard 9v over-lapping battery

3、Alarm mode:sound-light alarm simultaneously

4、Weight:500g

Key Features

Optimum Sensitivity: Detects ferrous,non ferrous and stainless steel weapons,

Contraband and other metal objects.

Self-calibrating:digital microprocessor technology eliminates the need for

Periodic sensitivity adjustments.

Elongated profile provides 9.5'' scan area 360 degree detection converage plus tip pinpointing for easy scanning from head to foot.

Easy and convenient to use with one-touch button and three-color LED lights.

Green LED light indicates ON;Amber LED indicates LOW BATTERY:Red LED

Indicates ALARM.

Clear audible or Silent / Vibrate LED alarm signal.

Rugged injection molded construction including structurally isolated coil for

Added impact absorption.Exceeds Mil-Std-810F(drop test) Method 516.5.

Procedures II and IV.

Ergonomically designed grip fits comfortably in virtually any size hand.

Easy ON/OFF battery cover: standard 9 v battery included.Optional

Rechargeable battery kit available.

Power switch and LEDs positioned for easy access and high visibility.

Warranty: 24 months,parts and labor

Design features and specifications are subject to change without notice.

Tech Specs

Operating Temperatures: -37 centidegree to 70 centidegree

Humidity:To 95 % noncondensing

Operating Frequency : 95 kHz

Audio Frequency: 2 kHz

Tuning: Automatic

Indicators: Silent / Vibrate; Audible Speaker; LED Alert Lights (Green: power

ON); Amber: Battery LOW;Red:ALARM condition)

Controls:3-way switch

        On (Speaker/LED light)

        Off

        On (Vibrating/LED Light)

Battery:Single 9 volt battery provides up to 80 hours of normal operation.

.Optional MiMH rechargeable battery provides up to 20 hours on each 12 hour

Recharge,

Super wand Dimensions:

Width : (8.3 cm)

Thickness : (3.2 cm)

Length: (48.3 cm)

Weight: (527g)

The Garrett 1165900 THD tactical handheld metal detector quickly and effectively targets all ferrous, non-ferrous and stainless steel weapons, contraband and other metallic objects. The unique 360 degree, 3.5 inch detection area allows unrestricted scanning angles for fast and accurate hands-free body searches. No tools are required for replacing the 9V battery used to power this handheld metal detector. Three LED function lights are included on the THD making it even easier to operate.

1165900 Features:

THD Metal Detector

Operating Frequency 95kHz

Accurate Detection of All Ferrous, Non-Ferrous & Stainless Steel Weapons, Contraband

Automatic Tuning

Power Switch & Momentary LED Flashlight

One-Touch Button & Three-Color LED Lights

Silent / Vibration LED Alert Lights

-35°F (-37°C) to 158°F (70°C) Operating Temperatures

Up to 95% Non-Condensing

Dimensions: 22 x 4 cm

The MD-3003b1 is a high performance hand held metal detector designed to meet the exact requirements of the security industry. Typical uses will include body search for offensive weapons in crowd control, airport and border security, checking parcels and letters for metal objects and anywhere that hidden metal needs to be detected.

Technical Specifications

Power Voltage： 9V(6F22) standard or rechargeable battery

Power : 270mW

Operate Frequency： 22KHz

Operate Current： < 50mA

Operating Voltage： 7V-9V

Operating temperature: -50℃ to +55 ℃

Net Weight ： 409g

Dimension ： 41(L) X 8.5(W) X 4.5(H)cm

Indicator：Visual: Red / Green LED

Detecting way : Speaker or Earphone;(Earphone not included) , vibration

Control：On/Off Switch; Low sensitivity Switch Sensitivity Adjuster

Performance: The sensitivity of the detector is determined primarily by the size, shape and composition of the object to be detected.

Maximum detection range:

Object low sensitivity optimum sensitivity

38 caliber hand gun 15cm 20cm

pen knife: 10cm, 15cm

Razor blade: 5cm 10cm

Export Packing：25 Pieces Per Carton 0.089CBM N.W 10.3KG ;G.W 16.5KG

Features: 
1) Operating frequency: 20kHz
2) Weight: 272g (including the battery)
3) Size: a) Length: 420mm
             b) Width: 138mm
             c) Height: 110mm
4) Handle measurement: 30 x 30mm
5) Regulate the way: manual
6) Indicator: BZ, vibration motor
7) LED light proves: LED red warning indicator lamp, LED green
    insufficient indicator lamp, voltage indicator lamp LED battery of power
 8) Battery: 9V battery (suitable for working for 40 hours normally)
9) Control: circulation switch (On, Off, a sound of light or mode of  vibration)
10) Uses cycle-switch to switch sound alarm and hidden vibration alarm respectively

11) Highly sensitive, detect ferrous and non-ferrous and stainless steel weapons
12) Sound and light alarm simultaneously
13) Alkaline cell (7V-9V) can work over 40 hours and distance does not change
14) Warn automatically when short of voltage
15) Simple, convenient to use, easy to adjust
16) Detecting distances:
      a) 1/2 pin: 10mm
      b) Model 64 pistol: 150mm
      c) 6" dagger: 150mm
      d) 8mm (diameter): 40mm
      e) Aluminum & copper sheet: 10mm         
       f) DIP14 IC (integrate circuit): 5mm
      g) Silver ring (1g): 40mm
      h) Lead brick (1g): 30mm

MD-300 metal detector is a mini-type hand held metal detector, mainly for security check in important places like customs, airport and court. It will gibe an alarm sound and vibration with low voltage power alarm.

LED light proves: LED red warning indicator lamp, LED green insufficient
Indicator lamp, voltage indicator lamp LED battery of power
Battery: 9V battery (suitable for working for 40 hours normally)
Control: Circulation switch (on, off, a sound of light or mode of vibration)
Uses cycle-switch to switch sound alarm and hidden vibration alarm respectively.
Highly sensitive, detect ferrous and non-ferrous and stainless steel weapons
Sound and light alarm simultaneously
Alkaline cell (7V - 9V) can work over 40 hours and distance does not change
Warn automatically when short of voltage
Simple, convenient to use, easy to adjust
Operating frequency: 20kHz
Weight: 272g(including the battery)
Size: 350mm(L)*138mm(W)*41mm(H)
Handle measurement: 300mm
Regulate the way: manual
Indicator: BZ,vibration motor
Battery: 9V battery

Detecting distances:
1/2 pin: 10mm
Model 64 pistol: 150mm
6" dagger: 150mm
8mm (diameter) iron ball: 40mm
Aluminaum&Copper sheet: 10mm
DIP14 IC(integrate circuit): 5mm
Silver ring(1g): 40mm
Lead brick(1g): 30mm
Model: MD300

GP-08 Super Wand Hand held Metal Detector designed to safeguard security-sensitive areas like schools, courtrooms, sports events, night club

Description:
The GP-008 handheld metal detector is a high performance Hand Held Metal Detector designed to meet the exact requirements of the security industry. The special design of it’s detecting area makes this model has very high sensitivity. It is adopted PC+ABS for mould material, and has functions of durable material, fine workmanship, and easy carry. The distinguishing feature is the streamlined design. Typical uses will include body search for offensive weapons in crowd control, airport and border security, checking parcels and letters for metal objects and anywhere that hidden metal needs to be detected. It can be charged and has powerful functions, low battery indicator, LED with buzzer or viberation alarm.   It is a good helper of security detecting

Features and Specifications:
(1) Stramlined, elegant appearance, super sensitivity.
(2) Detect ferrous and non-ferrous metal.
(3) 2 kinds of alarm method: buzzer & LED alarm; viberation & LED alarm.
(4) Adjustable sensitivity, easy use
(5) Low battery indicator/ Charge Lamp gives a timely alert
(6) After installing chargeable battery (*Optional) in the battery compartment, you can charge the device directlyFeatures & Specification:

Detection distance:
The sensitivity of the detector is determined primarily by the size, shape and composition of the object to be detected. Typical performance figures are given below:
Pin: 30-60mm
One coin: 75-100mm
6 inches knife: 160-180mm
64model hand gun: 180-195mm

Specification:
(1) Power: 9V (6F22) standard or rechargeable battery (*Optional)
(2) Frequency: 35KHz
(3) Voltage: 9V (6F22)
(4) Weight: 225G (without battery)
(5) Size: 40(L) ×8(W) × 4(H)cm
(6) Operating Temperature: -20°C to +55°C

Product features:
*It features advanced structure design concept, unparalleled streamline shape rich in rhythm.
*It features large and even detection working area, super high sensitivity, simple and convenient operation.
*One need not adjust its detecting sensitivity by simply choosing the high or low sensitivity range.
*The sound & light and vibration alarm can be switched by one button.
*It handle has adopted the anti-slip technique.
*It has adopted the world advanced wireless transmission charging technology with self-dominated intellectual property right.
*Experts' comments: This model has thoroughly embodied aesthetics in its overall design and application.
*Conforming to the ROHS and CE standards of European countries, this model certainly will become a favorite of the high-end buyers.


Product parameters

External dimensions: Length 340 mm*40 mm (handle diameter)*80mm
Working power supply: 6F22ND 9 V battery (alkaline battery, rechargeable
battery). The rechargeable battery is strongly recommended.
Airproof capability: IP64
Alarm modes: sound or light alarm
Product weight: 365 g

The HP140 Enhanced Hand Held Metal Detector is a high sensitivity device designed to detect magnetic and non-magnetic metal masses.
The unit can be used to detect weapons, detonators and other small pieces of metal concealed in baggage or correspondence.
The bidirectional detection probe allows both sides to detect metals evenly. The sensitivity of the surface is enhanced by the shape making operation of the device reliable and easy to operate.

Power supply
HP140V: 9V dry battery or 9V NiMH with contact charger
HP140VR: 9V NiMH with BC140F inductive charger

Simultaneous optical and acoustic alarm.
Built-in buzzer
Optical alarm and earphone silence mode
Sensitivity adjustable by stepless knob
Power on (green light)
Alarm (red light)
Low Batt (amber light)

Introduction:

1.Good detection depth (3m based on the target is USD 25 cent). 2.Strong Pinpointing performance. 3.Easy Operation. 4)Distinguish metal buried in the earth.

Main parameter:

Power supply: DC12V

Shooting frequency: 6.99Khz

Signal frequency: 437KHz

Visual: Lever Meter

Indicator: sound : 2 Speaker or earphone(earphone not included)

Disc: Ground Balance Controls

Disc Control: Ground Balance control

Tune control: sensitivity control

Discrimination Control

Zeroing control

Working electric current: 300MA at Max Volume

Sensitivity: 35cm or a US(25cent) Quarter with meter

Indication at min, discrimination

Accessories: Battery box and battery bag

Gross weight: 3.2kg

Colour: Black.

Features:

1) Good detection depth:

MD5008: 3 m(max detection depth)

2) Strong pinpointing performance

Can penetrate the earth, the stone, the chinaware or other plastic and wooden material which covered on the metal and find the metal exactly.

3) Great discrimination

4) Easy Operation.

5) Mainly function:

a) suitable to detect and distinguish metal buried in the earth.

b) suitable for checking metal in food,fuel and luggage.

c) suitable for detecting underground pipes.

d) suitable for mining and archeological digs.

6) Have the function to distinguish ferrous and Non-ferrous Metal.

7) Adopt the intellectualized operation system

8) Use the high strength material of ABS with light weight and long life-span

9) To distinguish if it’s the sound of ferrous via the earphone.

Main Feature:

1.High-brightness LED panel can generally displays the detected metal type according to the signal strength.
2.The all-metal detection mode is suitable for searching metal objects on the ground,and can be a simple recongnition of metals.
3.In addition to LED panel display,it can distinguish metal type by tones.
4.9.5 inch disk waterproof probe that can detect in the shallow water.
5.Equipped with an external headphone jack,connected to a single-channel
Headphones(headset-owned),easy to use,built-in high-capacity rechargeable battery,a low-voltage function,with charger,worked continuously for more than ten hours whenfull of power.

Packing list
1.Detector Host
2.Host backpack
3.Waterproof probe set
4.A set of Detecting connection rod(3 piece as a set)
5.Chargers
6.Headphones(optional accessory)
7.Product manuals

Spec:
1.Detection Depth: 1.5-3.5m
2.Signal Frequency:6.5 KHz
3.Audio Frequency:400 HZ
4.Power Supply:DC12V(Built-in rechargeable battery)
5.Power Consumption:0.8W

Introduction:

Thunderbolt II ground floor of the United States uses the latest electronic technology

Thunderbolt II ground floor of the United States uses the latest electronic technology, set to balanced line, and its balance model, in addition to all the "mineralization reaction" to probe the impact of, and identify the model can be detected to distinguish between are non-ferrous metals or ferrous metals, greatly enhance the effective detection of the depth and accuracy, with a probing depth, and positioning accuracy, resolution, and operation is simple and convenient features. In order to maximize the use of all the features of this product, before use, please carefully read the instructions.

This product apart from military applications, but also applies to the following areas:

(1) the public security departments Rapidity criminal search

(2) detection of raw materials, fuel, food metal debris

(3) to check mail, baggage and parcel of the metal items

(4) inspection of the underground pipes, cables

(5), archeology, prospecting

(6) was found buried in the ground hidden treasures of gold and silver and metal scrap metal

Garrett Scorpion Gold Stinger Metal Detector
with 5" x 10" Imaging Search Coil .

The Stinger offers three versatile modes unmatched by other gold hunting detectors.It's a deep-seeking gold finder,but this instruments also offers a hunting mode with the precise discrimination demanded by veteran coin-finders. When you're not locating gold nuggets, use your Scorpion Gold Stinger to locate coins,jewelry or any other kind of treasure.
Just switch modes, set your discrimination controls, and start hunting for coils,jewelry,and rings.

Wherever there is gold to be found, the Scorpion Gold Stinger will seek it out.Groundhog (15kHz) circuit is renowned over the world for its power in driving through ground minerals to pinpoint the tiniest gold nuggets. It was this circuit that started the detector gold rush in Australia and discovered the famed "Million-Dollar Hand of Faith" nugget. The gold stinger has been proven around the world as the universal gold detector.

Otherwise,the detecting depth can reach 3-6 m.

Specifications

UNDER GROUND METAL DETECTOR TO DETECT GOLD,SILVER ,COOPER AND OTHER MATIAL

MD-3010 II MAIN FEATURES:

Fully Automatic and All Metal Detectors - Your detector detects all kinds of metal objects. Unless you have set for some objects that you don’t want to detect.

LCD – The LCD with light, it improve to identify the metal in night or caliginous outside.

Target Identity - The detected objects are shown on the LCD display. You can decide immediately if the objects worth to be recovered.

Unwanted Target Elimination - You can set the detector not to respond to some objects.

Unique Tone for Target - You don’t have to keep watching the LCD display, when an object is being detected, an unique tone corresponding to a target will generate. You may even searching when there is little or no light.

No Clumsy Slack Cable - hidden search coil cable (connecting between control unit and search coil) avoid entangling and for ease of stem length adjustment.

Headphone Jack - provided for headphone connection. Both stereo or mono headphone can be used.

Volume Control - for adjusting the output volume to the loud speaker or headphone.

Introduction:
Graphic Target ID Cursor (12 Segments)* Discrimination: Accept/Reject Notch* Electronic Pinpoint* Sensitivity, Depth Adjustment (8 Settings)* Coin Depth Indicator* Headphone Jack* Interchangeable Ace Series Search coils* Large LCD Display* Microprocessor Controlled* Push Button Controls* Clear Speaker Tone* Tone ID (3 Levels)* Touch-n-Go Operation

Description
Specifications of Garrett ACE 250 Ground gold detector:
From custom notch discrimination, pinpointing, adjustable sensitivity and depth settings to the newest addition of the PROforman 
Brand New Garrett ACE 250 Metal Detector
Garrett ACE 250 Metal Detector

Features:
* Graphic Target ID Cursor (12 Segments)
* Discrimination: Accept/Reject Notch
* Electronic Pinpoint
* Sensitivity, Depth Adjustment (8 Settings)
* Coin Depth Indicator
* Headphone Jack
* Interchangeable Ace Series Search coils
* Large LCD Display
* Microprocessor Controlled
* Push Button Controls
* Clear Speaker Tone
* Tone ID (3 Levels)
* Touch-n-Go Operation

Specification:
* Length: 42" to 51" Adjustable
* Weight: 2.7 lbs (1.2 kgs)
* Frequency: 6.5 kHz
* 4-AA battery operation (batteries are included)
* 2 Year Warranty

Includes:
* 6.5 x 9" PROformance Search Coil
* Garrett Detectorist's Backpack
* Garrett Pro-Pointer
* Garrett ClearSound Headphones

Teknetics T2

Renowned Target Separation
Best Ergonomics in the Industry
Intuitive User Interface
Menu-Driven User Interface
Trigger Actuated Target Pinpointing
Double Filter Discrimination Modes for Searching in Trashy Areas
Trigger Actuated FASTGRAB™ Instant Ground Cancellation
Super Sensitive - Detect Coins to 15 Inches and more
Ground Mineralization Bar Graph Readout
Waterproof 11-Inch Open Frame Bi-Axial Search Coil
Great for Highly Mineralized Soils
Operating Frequency of 13 kHz

Introduction:
Features: 1.Can be used underwater at the depth of 10 meters; 2.Adjustable sensitivity control; 3.Adjustable volume; 4.Red light and audible alarm; 5.Automatic low voltage alarm,replace battery when LED is flushing and alarm is ringing continuously; 9.Adjustable handles for comfortable use;

Specifications

Discriminate metal material underwater or on the ground, ROHS-compliant and carry CE approvals.
Specification:
1.Detection depth: 50 cents(US):18cm
2.Detecting depth for underwater: ≤10m
3.Power supply: 8 pcs of AA batteries
4.Current consumption: 16mA(stand by current)
5.Operation temperature: -10~+50°c
6.Adjustable handles:104-124 cm
7. Size of search head: 10 inch
8.Weight: 1.8kg (approximate)

Features:
1.Can be used underwater at the depth of 10 meters;
2.Adjustable sensitivity control;
3.Adjustable volume;
4. Red light and audible alarm;
5.Automatic low voltage alarm,replace battery when LED is flushing and alarm is ringing continuously;
6.Adjustable handles for comfortable use;

Used for:
1.Ideally, MD3080 is a very superior tool for under water treasure hunting, operator can explore their targets at beach, sea, fresh water and so on;
2.In the public security field, it can be used for underwater material.

Introduction:
MPI Mine Locator (500 meters Underground) Natural Electric Auto Frequency Selector

Description
MPI Mine Locator (500 meters Underground)
Natural Electric Auto Frequency Selector
Compare with traditional electric prospecting instrument:
(1) Do not need power supply, use natural electric field, through special amplify method it just need 20 meters receiver pole to complete survey.
(2) 2 people is enough to finish the work with high efficiency
(3) Light weight less than 5KG, easy to bring.
(4) Printing all kinds of curve immediately with the portable printer and analyzing at the same time. You can adjust and change survey dispose.

Only one person will finish indoor and outdoor work
Do not need manual power supply，small cubage，light weight，carry about，high efficiency and exact address. It get over the default that traditional equipments have such as need many people to work together, heavy weight, complicated operation, low working efficiency and long lines.

Press one button to finish all the survey operations
Machine is automatic control by micro PC. Easy operation. A press one button to finish all the operation. It does not need especial knowledge. When the survey is finished, press the button to display the curve and you can analyze at the same time.

High anti-jamming capability
You can get the good curve in the noise road and high electric jamming area for signal via frequency selector and digital processing.

Get survey parameter through Multiple-frequency, Multi-aspect and multi-measurement.
It can survey in different position, do fixed point survey, solve same special geophysical problem and gather multi-measurement parameter through different kinds of survey method.

Widely application and flexible using
Using for locator underground water, minerals and solve engineering geophysical problem and geophysical disaster. Working area is from large to several square kilometer to small to several square, especially for mountain area and city prospecting.

Main functions and features
1. Automatic noise reduction; super anti-jamming.
2. 3 frequencies or 30 frequencies measuring at one time.
3. Operating functions are all on the LCD screen, easy operation.
4. Auto-measuring, auto-stocked data. It doesn’t need to record the measured data and the data wont be lost when power

Introduction:
Specifications: (1) Max Detection: 5-50m (2) Detect Range: 100-1000m (3) Rechargeable Battery: Continuous working 48 hours

Description
Detect Copper,Gold, Silver, Tin,Lead, Diamond, and Precious Stone. Detecting Range: 100-1000m, Depth: 5-50m, VR LONG RANGE KING

Introduction:
VR Long Range King Introduction: This model is our new upgraded version. VR Metal Detector System: The VR Ultrasonic Long Range King is an advanced Metal Detector System utilizing advanced FORWARD GAUSS technology that is both an audio and visual detector.

This metal detector was first used in the field in 1984 and the FORWARD GAUSS technology that it uses has proven to be (by far) the most successful.

This system was originally developed for professional archeologists and treasure hunters and has been used both on land and under water. With the development of faster and more complex processing units and a reduction in the cost of materials, we were able to begin offering this breakthrough technology to the general public at a much more affordable cost. Part of the success of this metal detector system is that it does not look like a standard metal detector. Instead, it has the appearance of a fine, well manufactured piece of scientific equipment that one might expect to find at an archeological site.

The VR Long Range King is custom built in a sturdy, hard side, padded case with two locks. The transmitter is case mounted and includes the Standard Six elements with selector switch. The system includes an installed, rechargeable gel cell battery with charger, transmitting antenna, receiving rods and receiver with belt clip, headphones and user manual all inserted into the specially fitted case.

Features and Functions:
(1) We add a function of indicator lights. These indicator lights show 20 different distances between the user with a receiver and the transmitter.
(2) Most common frequencies are for detecting Detect Copper,Gold, Silver, Tin,Lead, Diamond
(3) Detecting Range: 100-1000m
(4) Detecting Depth: 5-50m
(5) After tracking target, you will have some idea of the identification and the exact pinpoint.
(6) The face (front) of the transmitter has six LEDs (channel indicator lights) across the top; each is labeled for a particular element.

Components:
(1) A grey case with aluminum trim, a handle and two locks
(2) External Battery Port
(3) The Belt Receiver
(4) Head Phones
(5) Receiving Rods
(6) Battery Charger, AC/DC adapter, input AC 115V, output DC 9V
(7) Antenna
(8) Marker Flags
(9) Operators Manual

Specifications:
(1) Max Detection: 5-50m
(2) Detect Range: 100-1000m
(3) Rechargeable Battery: Continuous working 48 hours
(4) Power: 850mA
(5) Frequency: 433Mhz+/-150Khz
(6) Inner Storage: EEPROM 16k*8Bit
(7) Voltage: 9~12VDC
(8) Temperature Range: -40~85
(9) Operating Humidity: 0~95% (non-condensing)
(10) Ultrasonic Frequency: 400-3000Mhz+/-150Khz
(11) Weight: 14LBS

Specifications
1) Max Detection:3-50m
2) Detect Range: 1000m
3) Simple to use, easy to carry.
4) Power:850mA

Features:
1.VR long range locators series of deep long metal detection system, namely the treasure precious metals directional indicator. Its characteristic is the depth of the super large rapid scanning detection, a few minutes of detection area is equivalent to ordinary metal detectors work over a long period of time. The signal can wear mountain, detect the gold/silver/copper/lead/tin/diamond six kinds of precious metals. Instrument using microprocessor control, the central unit including abnormal correction, the drift of multiplexing and advance programming separator switch. Instrument can over a wide range of objects to send and receive signals, maximum detection range can be up to 1000 meters.
According to the mountain to penetrate test 40 meters signal attenuation, not in ideal conditions, geological conditions of single coin of the detection depth can be up to several meters.
2.VR6000 is used to locate gold. Silver, copper, compact, portable device. This is a remote big depth of the locator. In the latest wireless detection field, leading technology is the object of reflection. V6000 precious metal detection system adopts German scientist gauss theory, using atomic oscillation frequency to reach object found treasure the precious metals 

3.Technical parameters:
Maximum continuous rating: 850mA
Range of frequency: 433 MHZ + / - 150
Block internal memory: the EEPROM of the 16 k * 8 bits
Voltage supply: 9-12 VDC
Storage temperature: - 40 - + 85 °C
Working humidity 0-95% no condensation
Weight: 6.7 kg

MD88 Ground Search metal detectors

Introduction:
Specification: 1. Rechargeable, Battery Life L.E.D lights, charging indicator lights. 2. Full-control Ground Balance. 3. Unlike any other metal detector on the market today, MD88 could distinguish Ferrous and Non Ferrous metal 4. Be capable of remarkable depth and extreme sensitivity in the worst grounds. 5. Waterproof 15" search coil. Other accessory 12" coil available.

Description
In accordance with the needs of users, our company developed the MD88-type metal detectors MD88-type metal detectors used high-power launch, automatic tracking system, it is sufficiently probing depth and accurate identification ability is super-professional deep-detectors, particularly applicable to the detection of deep strata operations. The device has Discrimination and Ground Balance function. Could be charged directly. Has big and small search coils, earphone and charger.

Specification:
1. Rechargeable, Battery Life L.E.D lights, charging indicator lights.
2. Full-control Ground Balance.
3. Unlike any other metal detector on the market today, MD88 could distinguish Ferrous and Non Ferrous metal
4. Be capable of remarkable depth and extreme sensitivity in the worst grounds.
5. Waterproof 15" search coil. Other accessory 12" coil available.
6. Threshold Control. Accurately adjust the audio to hear the smaller, deeper signals.
7. Frequency Control adjusts for hunting near power lines, microwave or other environmental interference.
8. English Panel, easy operation
9. Two-year Parts and Labor Warranty. Lifetime Service.

Metal buried in the ground, we, through thick layers to exploration, geological structure will inevitably be affected. Formation contains a wide range of minerals, they will also have a metal detector signal, a signal of some minerals will cover up the signal swap metal caused illusion. The old test used metal has such experience, with the key in the probe ground surfaces, the signal also followed changes in the probe near the mound, stones, bricks would be given by the alarm sound, a phenomenon known as "mineralization reaction. " Because of this, the old metal detector test can only detect metal in the shallow soil, buried deep under the ground metal target is powerless. MD88-type apparatus equipped with advanced balance system, metal only strobe signal, eliminating the "mineralization reaction" interference, greatly improving the detection apparatus depth.
MD88-type machines used "level with the" design, random with a probe size of the two, under normal circumstances, such as soil conditions indoors or more complex, connected to a conventional small probe detection. Conventional detection work stability, and distinguish between accurate and anti-jamming capability of soil. In exceptional circumstances, such as in the field of soil uniform lots, the goal of finding buried very deep, can be connected to the probe to enhance detection, detection deepened when the apparatus is the best penetration, but vulnerable to clutter interference.

GPX4500 Ground gold detector

Introduction:
GPX4500 Gold detector with high sensitivity

Description
Gold detecting is a fascinating and rewarding activity enjoyed by people all over the world. By getting to know your GPX-4500 you can become one of the many who find gold and valuable treasure.
 The GPX-4500 is Minelab's most advanced gold detector. It is a high precision instrument incorporating Multi-Period Sensing (MPS), Dual Voltage Technology (DVT), Smart Electronic Timing Alignment (SETA), and the latest in high-tech analogue components combined with advanced digital processing.
The GPX-4500 will locate gold in all types of ground, especially highly mineralised ground conditions, with greater efficiency than any previous detector.
This manual is designed to help both the beginner and expert prospector get the best performance out of the GPX-4500.
TEC wishes you every success in your quest for gold and treasure!

Holding the Detector:
Thread your arm through the armrest and strap. Grasp the handle of the detector and rest your forearm in the armrest.
Adjusting the Position of the Handle:
Your elbow should sit just above the back of the armrest allowing you to comfortably grip the handle.
Slide the handle into position. Using a screwdriver, tighten the two screws which hold the handle onto the shaft. Adjust the handle strap to a comfortable position.
Adjusting the Length of the Lower Shaft:
If the coil is too far from your body it will be difficult to balance and manoeuvre while detecting.
If the coil is too close to your body it may detect your pick, the battery, or any other metal which you are carrying; causing confusing sounds.
Rotate the twistlocks of the shafts counter-clockwise to ensure that they are loosened.
Compress the spring pins of the shafts and move them up or down to suit. Once all shafts are clipped into position, rotate twistlocks clockwise onto the shafts until they are firmly clamped.
The correct length of the lower shaft should allow you to swing the coil in front of your body without any uncomfortable stretching or stooping.

The Lithium Ion battery is specifically designed
for the GPX-4500.
The Lithium Ion battery is not compatible with non CPX detectors. The GPX-4500 is supplied with a power lead which has been specifically designed to fit GPX detectors only. Attempting to use the Lithium Ion battery pack with other detectors may damage the detector or the battery pack.
Do not try to adapt this battery to other models as it will very likely
cause damage.
• Do not charge the battery at temperatures above 45°C (113°F).
• Do not charge the battery at temperatures below 0°C (32°F).
• Do not leave the battery in hot conditions (e.g. on the dashboard
of your car or rear parcel shelf).
• Do not immerse the battery in any liquid or allow water ingress.
• Do not throw the battery or impact it in any way.
• Do not short-circuit the battery.
• Do not use the battery if it is damaged or deformed.
• Do not disassemble or reconstruct the battery.
• Do not incinerate the battery.
In the event of a fault, you should return the battery to a Minelab
authorised service centre for repair.
The use of non-approved components will VOID YOUR WARRANTY.
There are no user serviceable parts within this battery pack.

Note: The GPX-4500 is a
‘motion’ detector. This means it must be moving over a target to detect it.

The GPX- 4500 will perform at i ts best wh en the coil is kept close an d parallel to the ground at al l times.
This will increase the d etecti on d epth and target response to small objects.
A variation in coil height at the end o f ea ch swing may cause confusing sounds and reduce detection depth; an even flat swee p is de s irable.
Practise sweeping the coil over the ground in a side -to-side motio n, while walking for ward sl owly at the end of each sweep. Slightly overlap the previous sweep to e nsure full ground coverage. An average sweep spe ed is four se co nds from left to right to left.
 

GPX5000 Ground gold detector


Introduction:
 More new features and functions make the GPX 5000 the best gold detector in the world

Description
More new features and functions make the GPX 5000 the best gold detector in the world gold detector by GPX-5000
More new features and functions make the GPX 5000 the best gold detector in the world
The GPX 5000 sets the new benchmark in gold detecting technology. With an amazing range of features and functions the GPX 5000 is not only superior to its predecessor, the GPX-4500, and is in a class of its own. Featuring Minelab's exclusive technologies, Multi Period Sensing (MPS), Dual Voltage Technology (DVT) and Smart Electronic Timing Alignment (SETA), the high performance GPX 5000 is capable of finding more gold than ever before. From sub-gram nuggets to the elusive 'retirement nugget' and everything in between, with the GPX 5000, you can find it.
New improved electronics, new Soil/Timings and an amazing range of features combined with the legendary GPX ability to ‘see through ground’ mineralisation, gives you a significant Depth Advantage over other detectors.
Using unique features, functions and industry leading patented technology ensure the GPX detectors run smooth and quiet in even the most severe ground conditions, whilst still maintaining excellent depth and sensitivity to gold nuggets. Serious detectorists know that GPX detectors find gold much deeper than ANY other detector, in ALL ground conditions. That's why we are confident to say we have the GPX Depth Advantage.
With more Timings than ever before, the 8 Timings available on the GPX 5000 change the digital switching and processing of the electronics in the detector. Each Timing has been designed for optimum performance under certain conditions, so it is like having a different detector each time you select a new Timing.
Also great for the specialist relic and jewellery hunter who demands the best, and wants to recover targets deeper than ever before.
Easy for the beginner through to the professional - you can switch on and go with six factory preset Search Modes and automatic functions.
When searching for gold you need the best. If you're looking for the very best gold detector. 

GPX4500F Ground gold detector

Description
Main features
1.High-brightness LED panel can generally displays the detected metal type according to the signal strength.
2.The all-metal detection mode is suitable for searching metal objects on the ground,and can be simple recognition of metals.
3.In adition to LED panel display,it can distinguish metal type by tones
4.9.5-inch disk waterproof probe that can detect in the shallow water.
5.Equipped with an external headphone jack,connected to a single-channel headphones
(headset-owned),easy to use,built-in high-capacity rechargeable battery, a low-voltage t function,with charger,worked continuously for more than ten hours when full of power.

Specification
1. Depth: 1.5-3.5m
2. Signal Frequency: 9.6KHZ
3. Audio Frequency: 400KHZ
4. Power Supply:DC12v(Built-in rechargeable battery)
5. Power consumption:0.8w
6. Connecting Rod Length:1.3m
7. Coil dimension:40cm
8. Net weight: 2.6 kg

Characteristics
This metal detector is designed for small cloth, leather ,socks, food, pharmaceutical, etc use.And for small quantity products.

SPECIFICATIONS:
Detection method: Magnetic induction
Material: aluminium
Detection sensitivity: 1.0-2.0MM
Detection Width: 200*500mm
Alarm method: Buzzer,Lamp
Power source: AC220-240V 50HZ
Rated output: Appr30W
Dimension: 660mm(L)×365mm(W)×70mm(H)
Packing: 740mm×420×120
Weight: Appr 10Kg

JZQ-86K Needle detector

Introduction:
1.have 1-12 level sensitivity adjustment.and the volume of alarm can adjust. There are four zones and corresponding pilot light.Each zones can work independently. 2.Two Way detection zones,and 30% higher sensitivity compared to JZQ-86B Model.

Description
JZQ—86Kis the promoted model of JZQ-86A/86B,made of aluminum alloy,double circuits detecting,Four Zones design,will greatly improve the detecting and leakage functions of the etector,and will be suitable in toy and costume industry.

Scope of Application:
It is mainly used to detect break needle,knife,metal splinters that lord or drop in raw materials and products in the field of cosume,wollen goods,neckties,chemical industry, 
leather,food and so on.

Function:
1.Japenese Technology,Integratedcircuit,aluminium alloy casing,very steady.
2.Very high sensitivity,high abilities of prevent interference. Can work for a long time continuely.
3.have 1-12 level sensitivity adjustment. and the volume of alarm can adjust.There are four zones and corresponding pilot light.Each zones can work independently.
4.Two way detection zones,and 30% higher sensitivity compared to JZQ-86B Model.

Correlation Parameter:
Electrical Source: 220 V 50 HZ
Power: 30 W
Size: 75cm(L) * 48cm(W) * 12 cm (H)
Detecting zone:50*25cm

Mainly used for detecting needlewhich drop in knitting, costuming ,shoes, socks and etc. it
can find the break needle fast and keep people in safety status.
Detection method：Magnetic induction
Detection sensitivity：Metal darner(0.75×30)
Detection adjustment：40mm
Detection area：60(w)*25(d)mm
Alarm method：Buzzer、Lamp
Designed for small products detection or exact locating.
Power source：9V dry battery
Dimension：65(L)*145(W)*45(H)mm
Weight：Appr200g

Product Introduction
TY-28MJ Hand-held Needle Detector It’s called portable needle detector, which is small, and easy to carry by hand. It uses principle of magnetic field, can effectively detect out the exact location of the broken needle or Fe, which is especially suitable for the thin and small goods. After detection by the big standing needle detector, use this portable one to find the exact location of the broken needle or Fe to avoid the damage to the customers and improve the quality of the products..

Application areas
used to detect the broken needle, razor blade, and metal fragment, ferromagnetism metal such metal impurities in small, thin clothing, plush toys, ties, towels, scarves, socks, zips, medicine, and food and so on.

Product Benefits
Has the switch function of vibration or sound to alarm..
Easy to operate, convenient to carry, and has high sensitivity.
Adopts imported digital chip, has stable capability and durable.
Can exactly recognize the location of the broken needle.
Can last long time to work, and won’t be warm
It will continuously sound when the voltage is lower than 6V, then need to replace the battery.
Can be used to detect the ferromagnetism impurities in clothing and fittings with hardware buttons.
Can detect the ferromagnetism impurities in medicine, food, industrial chemicals.
Can inspect the nails, steel bars in wood, wall, tables and so on.
Can inspect whether there is harmful iron dust inside when someone is injured.
Also can be used in frontier inspection, the government worker can rapidly search the hidden weapon of the criminals

SPECIFICATIONS:
Detection method: Magnetic induction
Detection sensitivity: 1.0
Detection Area:50*40 mm
Alarm method: Buzzer,Lamp, Vibration
Power source: AD9V
Dimension: 145mm(L)*55mm(W)*45mm(H)
Weight: 260g

  Specification
Stainless steel shell, anti-erosion and long life span.
 The electronic and mechanism design of the series of DLM auto-conveying metal detector is adopted advanced technique in the world, the design is suitable and the
appearance is beautiful DLM-503 owns the ability of high sensitivity and stable behavior
Scope of application:
DLM-503 is mainly used for detecting the metal chips inside the sea-food , fishery, noodle, frozen food, , sugar, tea, pharmaceutical products etc.

Product characteristic :
1: Stainless steel shell , anti-erosion and long life span .
2: The conveyor belt is made of nonpoisonous material 
3: Strong transport drive, all the products below 25kg can be conveyed to be checked.
4; Quick convey speed, it is specially suitable for pipeline operation.
5: When sensor detect a broken needle or over a diameter 0.8mm iron ball, buzzer will sound and conveyor belt will stop. After that, detected products will be return at hand.
6: The performance of the belt conveyer is complied with the American food sanitation standard ( FDA) , 
it can be used for transporting the unpacked food directly.
7: Can match the pipeline operation or automatic control device.

Technical parameters:
1.Inspection window size:
Normal height of inspection window( mm) : 120
Normal width of inspection window( mm) : 500
The measures of the inspection window which can be designed according customer’ s requirement.
2: Sensitivity: Diameter of 0.8 mm steel ball, weight of 1.2-1.5g Lead, copper and other globular metal parts
3: Electrical source: 220V 50Hz
4: Power : 120W
5: Alarm: Audible and visual alarm, automatic stop
6: Normal Size( mm) : 1740( L) X900( W) X1030( H)
7: Net Weight: approx 375

Introduction:
DLM-508K Series digital style of intelligent metal detectors, using kinds of the most advanced electronics, Adopt electromagnetic detection and DSP, DDS and many other digital signal processing technology.
Comparing with traditional simulation detector, the function is more completely, the capability is more stable and dependable. It's specifically for food, medicine, chemicals, rubber and metal needs detection of application-specific design occasions. Particularly suited to tobaccos, toys, footgear, cosmetics, lavation products, plastics, leathers, building material and other industries. It accord with the demand of certification-HACCP, QS, ISO9000.

Feature:
1. Simple operation menu, all settings and using are simple and convenient without any adjustment for operators.
2. All the equipment parameters of detection are locked automatically, when use it, you can just place the product that needs detected on the conveyors, then the system of detection will recognize automatically.
3. It can detect the iron, stainless steel, copper, Al and all kind of metal chips which mixed with products. As well as, some of non-metal that transmitting electricity and magnetism.
4. Can record up to 20 kinds of different products, parameters of detection and the most simple operation is replacement of different products occasions frequently.
5. The style of conveyors is opening and unloading structure, for day-to-day cleaning.

Widely using scope:
1. Apply to food (including aquatic products and quick-frozen food, extruded food, salted foods etc...) pharmaceuticals, plastic, chemicals textiles and other occasion that need metal detection.
2. Apply to high temperature, low temperature(minus twenty degrees), damp, dry, dust, dew and other poor work environment.

High sensitivity detection:
1. Using the detection circuit with specially high-performance design and with advanced digital signal processing algorithms. The actual detection proved that it reached the most advanced international level.
2. Against the variety of detector products, with the learning functions of automatic identification. Overcome the effect of products material efficiently.
3. Detection probe is designed specially and improved the detection sensitivity further. Improve the detection sensitivity.

Good Stability
1. Adopting DSP, DDS and many other digital technology to process testing signal. Comparing with traditional simulation detector, it has the advantage of universal function, stable capability, high credibility.
2. Timber known, fine craft, solid structure, good-looking in appearance, durability.
3. Main structure adopted international SUS304 manufacturing, the sandblasted surface treatment, good corrosion resistance, good-looking and easy to clean.

Related Keywords: metal detector , conveying detector , security check , X-ray

Characteristics
1. Equipped with LIANXIN microcomputer chips from USA for digital signal management, it can analyze the different channel signals and improved the detection reliability.
2. Special inducing design in the detection field, the sensitivity and anti-disturbance ability are greatly improved, and it is not disturbed by the environment.
3. Unique inducting design of balanced magnetic field to meet the needs of different clients, especially for the detection of garment accessory.
4. With digital display in Chinese, touching screen of films. It is convenient for operation and management.
5. The perfect combination of powerful functions and simple operation is also a friendly philosophy of design.
6. Equipped with the intellectual location displaying system, which can indicate the location of the needle.
7. The intellectual counter system can calculate the qualified and unqualified objects amount.
8. Equipped with safe lock only, which can lock the sensitivity, so that it is convenient for management.
9. Digital sensitivity regulation, the induction strength can show the disturbance and Iron content.
10. Equipped with light control automatic alarm and automatic power off function.

SPECIFICATIONS:
Detection method: Magnetic induction
Detection sensitivity: 0.8mm steel
Detection adjustment: 10step
Detection width: 550mm
Detection high: 120mm-150mm-200mm
Alarm method: Buzzer, 8 indicator light for steel locating
Belt speed: 25m/min
Power source: AC200-240V 50-60HZ
Rated output: Appr150W
Dimension: 1650mm(L)*1200mm(W)*930mm(H)
Weight: 160Kg

Šešios detektavimo zonos

Šešios detektavimo zonos

18 detektavimo zonų