Lietuviškai | English

PRODUKTAI


Pasirinkite veiklos sritį, po to produktą dešinėje.


AVIGA   |   EUROTERA   |   GERAGRA   |   MEDICININĖ TECHNIKA

Nuotrauka Pavadinimas Techn. charakteristikos Kaina
be PVM
Terapijos kėdė su kintamu aukščiu ir keičiamais sėdynių apmušalais Comfort-4 Battery
Daugiau

● Electronic adjustments

Multiple independent adjustment possibilities offer maximum patient comfort, plus a reduction in work for staff.

5 motors as standard:

backrest

seat tilt

legrest

seat height

footrest

● Specialities:

Perfect horizontal BED position

Real TRB position that meets TRB Compliance of EN 60 601-2-52 201.15.4.6.2"with the mattress support in the flat position , tilting of entire mattress support platform a minimum of 12 degrees so that the patient head is lower than the circulatory centre point of the body"

 

Technical specification  
Seat height adjustment 56-76 cm
Backrest adjusting range 80 degrees (-13 degrees under horizontal in Trendelenburg position)
Seat tilt adjustment 20 degrees
Legrest adjustment 30 degrees
Footrest adjustment 29 cm (manually)
Dimensions in seat position L 145 x W 92 cm or L 145 x W 80 cm*
Size of upholstery L 215 x W 60 x H 9,5 cm
Armrest size L 57 x W 17 cm
Size of castors 4x diameter 10 cm swivel castors with total lock
Weight of chair 78 kg
Maximum patient load 200 kg weight capacity
Standard power supply 230 V, 50-60 Hz (100 V, 120 V optional)
Technical data of motors 24 V DC, IP 66
Frame colour RAL 9001
Applied directive and standards 93/42/EEC and harmonized standards (EN 60601-1; EN60601 2-52; etc.)
Mažiau
0,00LT
Terapijos kėdė su pažangios kontrolės sistema Comfort-4 Plus
Daugiau

● Intelligent control system

Our medical approved (TÜV GM Mark) electronic control unit provides an opportunity to achieve several comfort and safety features.

● Electronic adjustments

Multiple independent adjustment possibilities by 4+1 motors offer maximum patient comfort, plus a reduction in work for staff.

 

4 motors as standard:

backrest

seat tilt

legrest

seat height

 

● SSP motor control

 

It uses regulated motor controls for soft position changes in order to provide maximum patient safety and comfort.

● Manual adjustment

footrest (optional electronic footrest adjustment is also available)

● Specialities:

Perfect horizontal BED position

Real TRB position that meets TRB Compliance of EN 60 601-2-52 201.15.4.6.2"with the mattress support in the flat position , tilting of entire mattress support platform a minimum of 12 degrees so that the patient head is lower than the circulatory centre point of the body"

 

Technical specification  
Seat height adjustment 54-76 cm
Backrest adjusting range 80 degrees (-13 degrees under horizontal in Trendelenburg position)
Seat tilt adjustment 20 degrees
Legrest adjustment 30 degrees
Footrest adjustment 29 cm
Dimensions in seat position L 145 x W 92 cm or L 145 x W 80 cm*
Size of upholstery L 215 x W 60 x H 9,5 cm
Armrest size L 57 x W 17 cm
Size of castors 4x diameter 10 cm twin swivel castors with total lock
Weight of chair 90 kg
Maximum patient load 200 kg weight capacity
Standard power supply 230 V, 50-60 Hz
(special power supplies upon request)  
Technical data of motors 24V DC, IP 66
Frame colour RAL 9001
Applied directive and standards 93/42/EEC and harmonized standards (EN 60601-1; EN60601 2-52; etc.)
Mažiau
0,00LT
Terapijos kėdė su 3 dimensijų apdaila ir plastikiniais dangteliais Comfort-4 Style 
Daugiau

 

● Intelligent control system

Our medical approved (TÜV GM Mark) electronic control unit provides an opportunity to achieve several comfort and safety features.

● Electronic adjustments

Multiple independent adjustment possibilities by 4+1 motors offer maximum patient comfort, plus a reduction in work for staff.

4 motors as standard:

backrest

seat tilt

legrest

seat height

●SSP motor control

It uses regulated motor controls for soft position changes in order to provide maximum patient safety and comfort.

● Manual adjustment

footrest (optional electronic footrest adjustment is also available)

● Specialities:

Perfect horizontal BED position

Real TRB position that meets TRB Compliance of EN 60 601-2-52 201.15.4.6.2"with the mattress support in the flat position , tilting of entire mattress support platform a minimum of 12 degrees so that the patient head is lower than the circulatory centre point of the body"

 

Technical specification  
Seat height adjustment 54-76 cm
Backrest adjusting range 80 degrees (-13 degrees under horizontal in Trendelenburg position)
Seat tilt adjustment 20 degrees
Legrest adjustment 30 degrees
Footrest adjustment 29 cm
Dimensions in seat position L 145 x W 92 cm or L 145 x W 80 cm*
Size of upholstery L 215 x W 60 x H 9,5 cm
Armrest size L 57 x W 17 cm
Size of castors 4x diameter 10 cm twin wheel castors for central operating brake
Weight of chair 90 kg
Maximum patient load 200 kg weight capacity
Standard power supply 230 V, 50-60 Hz
(special power supplies upon request)  
Technical data of motors 24V DC, IP 66
Frame colour RAL 9001
Applied directive and standards 93/42/EEC and harmonized standards (EN 60601-1; EN60601 2-52; etc.)
Mažiau
0,00LT
Terapijos kÄ—dÄ— su precizine svorio matavimo sistema Comfort-4 Scale
Daugiau

 

● Intelligent control system

Our medical approved electronic control unit provides an opportunity to achieve several comfort and safety features.

● Electronic adjustments

Multiple independent adjustment possibilities by 4+1 motors offer maximum patient comfort, plus a reduction in work for staff.

4 motors as standard:

backrest

seat tilt

legrest

seat height

 

● Manual adjustment

footrest (optional electronic footrest adjustment is also available)

● Specialities:

Perfect horizontal BED position

Real TRB position that meets TRB Compliance of EN 60 601-2-52 201.15.4.6.2"with the mattress support in the flat position , tilting of entire mattress support platform a minimum of 12 degrees so that the patient head is lower than the circulatory centre point of the body"

Weight measurement system

It provides continuous monitoring of patient weight and weight change during treatments. It has been tested and certified by Notified Body which is required for Authenticated Officials to legally verify accuracy of the scale.

 

Technical specification  
Seat height adjustment 54-76 cm
Backrest adjusting range 80 degrees (-13 degrees under horizontal in Trendelenburg position)
Seat tilt adjustment 20 degrees
Legrest adjustment 30 degrees
Footrest adjustment 29 cm
Dimensions in seat position L 145 x W 92 cm or L 145 x W 80 cm*
Size of upholstery L 215 x W 60 x H 9,5 cm
Armrest size L 57 x W 17 cm
Size of castors 4x diameter 10 cm swivel castors with total lock
Weight of chair 95 kg
Maximum patient load 200 kg weight capacity
Approved Scale accuracy 100 g
Standard power supply 230 V, 50-60 Hz
Technical data of motors 24V DC, IP 66
Frame colour RAL 9001
Applied directive and standards 93/42/EEC and harmonized standards (EN 60601-1; EN60601 2-52; etc.)
Mažiau
0,00LT
Terapijos kÄ—dÄ— Comfort-2 Eco
Daugiau

 

● Electronic adjustments

Multiple independent adjustment possibilities by 2 motors offer patient comfort, plus a reduction in work for staff.

2 motors as standard:

backrest

legrest

● Manual adjustment

footrest adjustment manually

Technical specification
Fixed seat height 65 cm
Backrest adjusting range 75 degrees (-7 degrees under horizontal in Trendelenburg position)
Seat tilt adjustment (fixed) Seat position fixed at 7 degrees
Legrest adjustment 35 degrees
Footrest adjustment 29 cm
Dimensions in seat position L 145 x W 92 cm
Size of upholstery L 215 x W 60 x H 9,5 cm
Armrest size L 57 x W 17 cm
Size of castors 4x diameter 7,5 cm twin wheel castors with total lock
Weight of chair 63 kg
Maximum patient load 200 kg weight capacity
Standard power supply 230 V, 50-60 Hz (100 V, 120 V optional)
Technical data of motors 24 V DC, IP 66
Frame colour RAL 9001
Applied directive and standards 93/42/EEC and harmonized standards (EN 60601-1; EN60601-2-52; etc.)
Mažiau
0,00LT
Terapijos kÄ—dÄ— Comfort-2 Flex
Daugiau

 

● Electronic adjustments

Multiple independent adjustment possibilities offer maximum patient comfort, plus a reduction in work for staff.

3 motors as standard:

backrest

seat tilt

legrest

 

● Manual adjustment

footrest adjustment manually (optional electronic footrest adjustment is also available)

● Specialities:

Perfect horizontal BED position

Real TRB position that meets TRB Compliance of EN 60 601-2-52 201.15.4.6.2"with the mattress support in the flat position , tilting of entire mattress support platform a minimum of 12 degrees so that the patient head is lower than the circulatory centre point of the body"

 

Technical specification  
Fixed seat height 63 cm
Backrest adjusting range 75 degrees (-14 degrees under horizontal in Trendelenburg position)
Seat tilt adjustment 14 degrees
Legrest adjustment 35 degrees
Footrest adjustment 29 cm
Dimensions in seat position L 145 x W 92 cm
Size of upholstery L 215 x W 60 x H 9,5 cm
Armrest size L 57 x W 17 cm
Size of castors 4x diameter 7,5 cm twin wheel castors with total lock
Weight of chair 63 kg
Maximum patient load 200 kg weight capacity
Standard power supply 230 V, 50-60 Hz(100 V, 120 V optional)
Technical data of motors 24 V DC, IP 66
Frame colour RAL 9001
Applied directive and standards 93/42/EEC and harmonized standards (EN 60601-1; EN60601 2-52; etc.)
Mažiau
0,00LT
Terapijos kėdė su kintamu aukščiu ir keičiamais sėdynių apmušalais Comfort-4 Eco
Daugiau

 

● Electronic adjustments

Multiple independent adjustment possibilities offer maximum patient comfort, plus a reduction in work for staff.

4 motors as standard:

backrest

seat tilt

legrest

seat height

● Manual adjustment

stepless manually adjustable footrest provides the best comfort for any phyasique

● Specialities:

Perfect horizontal BED position

Real TRB position that meets TRB Compliance of EN 60 601-2-52 201.15.4.6.2"with the mattress support in the flat position , tilting of entire mattress support platform a minimum of 12 degrees so that the patient head is lower than the circulatory centre point of the body"

 

Technical specification  
Seat height adjustment 54-76 cm
Backrest adjusting range 80 degrees (-13 degrees under horizontal in Trendelenburg position)
Seat tilt adjustment 20 degrees
Legrest adjustment 30 degrees
Footrest adjustment 29 cm (manually)
Dimensions in seat position L 145 x W 92 cm or L 145 x W 80 cm*
Size of upholstery L 215 x W 60 x H 9,5 cm
Armrest size L 57 x W 17 cm
Size of castors 4x diameter 10 cm swivel castors with total lock
Weight of chair 78 kg
Maximum patient load 200 kg weight capacity
Standard power supply 230 V, 50-60 Hz (100 V, 120 V optional)
Technical data of motors 24 V DC, IP 66
Frame colour RAL 9001
Applied directive and standards 93/42/EEC and harmonized standards (EN 60601-1; EN60601 2-52; etc.)
Mažiau
0,00LT